(Battery Lock)
push to
release
CR2032
Fig.5
Fig.4
Operation:
Once the Console and all Displays are connected and set, press button A will
start count down with a blinking dot shown in figure 3. Press button A again to
restart the count down when possession changed. Press button B to stop the
count down with the dot stop blinking. Press button A again to resume or
press button B to reset the timer.
When count down reaches zero the shot clock will sound for 1 second, all
Displays and the Console will return to the preset time automatically.
Battery Replacement:
When the Console or the Display unit becomes dim or faded out, battery for
display replacement is necessary.
1) Turn the battery cover off from close to open position.
2) Push the Battery Lock in the direction as shown in figure 4 to release
the old battery.
3) Install a fresh lithium battery CR2032 into the battery holder, please
make sure the Battery Lock is in position shown after replacement.
4) Re-installed the battery cover, turn the dot from open to close position.
If the sound of the Display unit is low, please open the Speaker Battery cover
to replace all 4 pieces AA size alkaline batteries as shown in figure 5. When
the Display unit is not in use, please remove those AA size batteries from the
compartment to prevent battery leakage.
BK163.1
www.digisportinstruments.com
3
