"Digi II" Series Heater Installation & Operation Instructions
Programming Memory (User buttons) continued...
Press the
TEMPERATURE
button and the temperature value will appear in the display current
temperature setting:
50C
The temperature can now be set using the arrow keys. When the desired
temperature has been selected, press
PROG/OK
and the display will return to the previous screen.
To save the values to memory, press the memory buttons 1. The display will now read:
PROGRAM1
01:00 50C
Press
PROG/OK
once again to return the display to
17:30
01:00
50C .
To program another memory button go back to the beginning of Programming Memory (user buttons). Press
ON/OFF
to exit the programming mode.
Review
When the device is in Off mode, you can review your programmed values by pressing the memory
buttons.
Setting Time Delay without Saunasmart:
The control is in the Off mode:
Press
ON/OFF
and A
greeting appears in the display and the backlight comes on.
Press
PROG/OK and
the following will appear in the display start time, sauna length, and temperature.
17:30
01:00
The maximum the timer will allow the heater to operate is 60 minutes.
90C
Press Time Delay button and the hours and minutes (hh:mm) will appear in the display.
START:
12:00
The start time can now be set using the arrow buttons. When the desired time has been selected, press
PROG/OK
and the display will return to the previous screen.
Press the
Sauna Length
button and the hours and minutes (hh:mm) will appear in the display.
Sauna Length
:
01:00
The duration can now be set using the arrow keys. When the desired time
has been selected, press
PROG/OK
to return to previous screen.
Press the
TEMPERATURE
button and the temperature value will appear in the display current
temperature setting:
50C
The temperature can now be set using the arrow keys. When the desired
temperature has been selected, press
PROG/OK
and the display will return to the previous screen.
Press
PROG/OK
and hold down for about 3 seconds until the following appears in the display:
15:00
17:30 SAUNA
15:00
is the current time and
17:30
is the start time, when the sauna is automatically turned on.
SECTION 6: OPERATION, CONTINUED
