Digi DC-190 Series, Operation Manual

Page: 82 / 82

QUICK GUIDE
(operation mode)
OPERATION PROCEDURE
Tare out an empty
Place an empty container on the press [TARE] key
Enter a known tare
Enter the tare weight as it would appear in the window,
press (TARE]
Change to gross weight display
Change back to net
Press [NET/GROSS] key
Press key again
Compute a weight
Place pieces on press [PIECES] key
or
Place an arbitrary number of on the scale, enter the
number of pieces and press the
Re-compute a unit weight as long
as the light is on after are
added)
Add a number of pieces to the sample and press the
key.
Enter a known unit weight
Enter the weight press
WEIGHT] key.
Accumulate a quantity
memory)
With first quantity on the scale, press key. When
display returns to normal, remove parts from the scale
and count second quantity. Repeat until all items have
been counted. Press a
mistake is made during accumulation, press key to
delete that quantity.
Clear a unit weight in the display Press [CLEAR] key.
or
Enter then press the WEIGHT] key.
Clear a tare weight in the display Press [TARE] key.
or
Press the [REZERO] 1 (See note 1 below.)
til Tare clear automatically when changing scales
the [SCALE]
Note: For DC-190 See spec28 Bit 3, for See spec 14 Bit 3
Applies to only.