19
6.1.3. Set Point Programming by Upper and Lower Limit of Quantity
Set Point 1 : Quantity (See Note Below),
Set Point 2 : Quantity (See Note Below)
Set bit 0 and 1 of Spec 7 to 10
1
Display in the weighing mode
2
Press the
[MODE]
key to go into the programming mode.
3
Press
[
+
+
+
+
]
key to go into Set Point Programming Mode.
4
Enter the Quantity value for Set Point 1 using the
[Numeric]
keys. Example: type
[2][0][0][0][0]
Please see the note below.
5
Press the
[
+
+
+
+
]
key to program Set Point 2.
6
Enter the Set Point 2 value using the
[Numeric]
keys.
Example: type
[1][0][0][0][0]
Please see note below.
7
Pressing the
[
+
+
+
+
]
key exits from the Set Point Programming mode, but remains in the Programming
mode.
8
Pressing the
[MODE]
key exits from Programming mode and returns to Weighing mode.
Note :
Set Point 1 : Must be a quantity value up to 999999
Set Point 2 : Quantity value up to 999999, but Set Point 2 value must always be less
than Set Point 1 value.
6.1.4. Set Point Programming by Upper and Lower Limit of Weight
1
Display in the weighing mode
2
Press the
[MODE]
key to go into the programming mode.
3
Press
[
+
+
+
+
]
key to go into Set Point Programming Mode.
4
Enter the Weight value for Set Point 1 using the
[Numeric]
keys depending on the capacity of the
scale.
Example: type
[3][.][0][0][0][0]
Please see the note below.
5
Press the
[
+
+
+
+
]
key to program Set Point 2.
6
Enter the weight value for Set Point 2 using
[Numeric]
keys. Example: type
[2][.][0][0][0][0]
Please
see the note below.
7
Press the
[
+
+
+
+
]
key exits from the Set Point Programming mode but remains in the Programming
mode.
8
Pressing the
[MODE]
key exits from Programming mode and returns to Weighing mode.
Note :
Set Point 1 : Must be a weight value depending on the capacity of the scale.
Set Point 2 : Weight value up to the capacity of the scale, but Set Point 2 value
must be less than Set Point 1 value.
DISCONTINUED
