background image

Digi ConnectTank Getting Started Guide

Page 39

Long Name

Short name

Comments/Semantics

Alarm enable mask (8 bits)

aem

Enable bit for various alarms from LSB to MSB 

(1 is enabled)
0 - Alarm high enable - alh
1 - Alarm low enable - all
2 - Alarm delta low enable - adl
3 - Alarm delta high enable - adh
4-7 - Reserved for future use 

Alarm hysteresis

ahy

-/+ ahy from high/low alarms respectively.  

Alarms high and low do not retrigger until 

condition is not true for 1 reading outside of 

hysteresis.  

Alarm reason mask (8 bits)

arm

Bits from LSB to MSB (1 means the alarm was 

tripped):
0 - Alarm high 
1 - Alarm low 
2 - Alarm delta low 
3 - Alarm delta high 
4 - Manual upload
5 - Low battery alert
6-7 - Reserved for future use 

Alarm battery

abt

Send battery channel alarm, when battery <= 

abt
Default to 75 (75%)

Hardware version (e.g., PCB version)

hwv

String that returns the hardware version. 

Firmware version (e.g., PIC code version)

fwv

Recommend major.minor.maint.build (for 

example, 1.0.0.101).

Software version (e.g., Digi BREW code 

version)

swv

Recommend major.minor.maint.build (for 

example, 1.0.0.101).

SMS version

smsv

SMS extension version. Recommend major.

minor.maint.build (for example, 1.0.0.101).

I2C version

i2cv

I2C extension version.  Recommend major.

minor.maint.build (for example, 1.0.0.101).

GPS feature

gps

GPS ON/OFF feature.
0 – GPS Off, 1 – GPS On.

POSIX time

tim

Set current POSIX time. 
Epoch time from Jan 1 1970 (in seconds).

Summary of Contents for ConnectTank










































Reviews: