www.tankscan.com
12
Wait for “
Storage transaction complete
”
message to appear, power indicator to be solid
green, XBee indicator to be blinking green,
and network indicator to be solid green before
moving to next step.
Important: This may
take a couple of minutes before gateway
reaches this state of operation.
13
TankScan Wi-Fi Gateway
Setup Instructions
Enter a network Shared Key (password), if
required. There is no Shared Key for open
networks. Then click “
Apply
”. The gateway
will apply the network parameters. Network
interruption may occur during this time, as
well as a potential gateway reboot.
NOTE: If the Shared Key (password) changes,
repeat steps 1 -11 to update with the new
password.
11
Select the Security Mode used on the wireless
network from the drop down menu. Typical
modes are
WPA-PSK
(Pre-shared key),
WPA-EAP
(Extensible Authentication
Protocol),
WEP
(Wired Equivalent Privacy),
and
Open
(unsecured). Then click “
Apply
”.
