Digi ConnectPort X2e Setup Instructions Download Page 2

Page: 2 / 4

www.tankscan.com

Install and run the Digi Device Discovery Utility. Locate the device
labeled ConnectPort X2e Wi-Fi ZB. Click once on the device and
then click on “

Open web interface

” under Device Tasks (double

clicking the device will bring you to the web interface as well).

After the Web user interface loads, select
“

Wireless Wizard

”.

Select your facility’s wireless network or enter
the network’s SSID and click “

Apply

”.

TankScan Wi-Fi Gateway
Setup Instructions

Summary of Contents for ConnectPort X2e

Page 1: ...Press and release black button on the X2e once The X2e will enter into a special access point mode network indicator turns solid orange for five minutes While the network indicator is solid orange ch...

Page 2: ...on the device and then click on Open web interface under Device Tasks double clicking the device will bring you to the web interface as well 9 After the Web user interface loads select Wireless Wizar...

Page 3: ...r a network Shared Key password if required There is no Shared Key for open networks Then click Apply The gateway will apply the network parameters Network interruption may occur during this time as w...

Page 4: ...ction with the sale of TankScan products expressly or by implication TankScan Wi Fi Gateway Setup Instructions 16 Verify via Web User Interface home page that the device is connected to the internet c...