Digi 9P 9360/9750 User Manual Download Page 15

Page: 15 / 75

1 5

R e q u i r e m e n t s

Requirements

System Requirements/Prerequisites

System requirements

Your development system should be a reasonably fast x86-based host PC with an Ethernet

interface, a serial port, and a parallel port.

Different Linux distributions such as SuSE, Debian, or RedHat can be used for the

development. This documentation is based on the Debian Linux distribution; however,

other distributions with minor changes in the settings can also be used. Please refer to the

manuals of your Linux distribution if settings are not working as described in this

document.

The following software is required on your development system:

GNU C library glibc 2.3

GNU C compiler gcc >= 2.95.3 (3.3 or higher recommended)

GNU make version >= 3.80

awk

perl >= 5.6.0

autoconf >= 2.59

Terminal client software (such as Minicom or Seyon)

TFTP daemon

NFS daemon

rsync

Summary of Contents for 9P 9360/9750












































































Search results

Summary of Contents for 9P 9360/9750

Reviews:

Related manuals for 9P 9360/9750

Brands by name

Popular brands

Digi 9P 9360/9750, User Manual

Search results

Summary of Contents for 9P 9360/9750

Reviews:

Related manuals for 9P 9360/9750

Brands by name

Popular brands