Set the tare with the packaging that with receive the
sample.
Press the T button to set the tare.
Press the L button two times and the word ``tare´´ will
appear on the display. Press the T button and the text will
start to blink. At this time, do not touch the platform.
OBS: In the case that you are not using any packaging the
display will read `VAZIA´ (empty).
The word PESO (weight) will appear the samples should
be placed in the packaging.
Press ´T`, the word will start to blink. At this time do not
touch the platform. Whatever mistake will cancel the
configuration (message ERRO 6/ error 6) and the
procedure will have to be repeated.
After reading the weight, the message qtd will appear.
Press ´T´ to enter the number of samples.
Note: The qtd message will only appear if the number of
samples is greater than or equal to the minimum weight
(20 unit divisions).
For example, there are 10 pieces to be weighed. Press the
´T` button to see the cursor.
Press the `L` button to change the value.
Press the ´Z´ button to accept the value and start the
counter.
