5.9
Blinking Display
-
If the display is blinking after a command on the keypad (tare or printing), there is a
pending command waiting for the platform’s stability or the minimum weight set the
tare or to print.
-
If the display is blinking after starting up the scale and keeps on blinking for an
extended period of time the instrument is not able to stabilize a zero reading. Check
for vibrations in the platform.
-
If the problem persists, seek technical assistance.
5.10
Display with some segments dimly lit
5.11
The Scale doesn’t turn on
Symptom: The start-up message may light up completely but shuts down immediately or lights
up and shuts down before the start-up is finished.
5.12
The scale turns off after weighing or counting
-Recharge the battery
- Check to see if the Display Shut-Off Time function is activated.
Symptom: Digits or LED´s keep blinking or are
dimly lit. Seek technical assistance.
If it turns on with the display brightly lit, there is too
much power. Seek technical assistance.
If it lights up normally but it is not able to finish the
start-up, there is not enough power. Check the
battery and recharge if necessary.
Symptom: The scale turns off after the start-up’s
00000.
Notes
