INSTRUCTION MANUAL
SCOREBOARD KIT 24
FEATURES:
· Up to 59 seconds count down timer.
· 100mm height large digits LCD
Display.
· 33 meters connection cables come
with large display.
· Multiple shot clock displays can be
linked.
· Two buttons control only.
· Power ON/ OFF switch in the Display.
· One console controls all Displays.
· 1 second long beeps at time zero.
· Operational key tone.
CONSOLE TIME SETTING:
Press and hold the Console Start/ Reset
button two seconds to enter in the timer
mode to set mode.
The LCD will blink in the set mode,
press Set button to set count down time
(max 59 seconds). Press button B to exit
set mode or auto exit in 30 seconds.
DISPLAY AND CONSOLE
CONNECTION:
Switch OFF the Display and connect the
Display to the Console as in figure 2
then switch ON the Display. When the
Console and the Display are connected,
press and hold A and B buttons for 2
seconds to synchronize all Displays to
the same set time.
OPERATION:
Once the Console and all Displays are
connected and set, press button A will
start count down with a blinking dot
shown in figure 3. Press button A again
to restart the count down when
possession changed. Press button B to
stop the count down with the dot stop
blinking. Press button A again to resume
or press button B to reset the timer.
When count down reaches zero the shot
clock will sound for 1 second, all
Displays and the Console will return to
the preset time automatically.
BATTERY REPLACEMENT:
When the Console or the Display unit
becomes dim or faded out, battery for
display replacement is necessary.
1) Turn the battery cover off from close
to open position.
2) Push the Battery Lock in the direction
as shown in figure 4 to release the old
battery.
3) Install a fresh lithium battery CR2032
into the battery holder; please make
sure the Battery Lock is in position
shown after replacement.
4) Re-installed the battery cover, turn
the dot from open to close position. If the
sound of the Display unit is low, please
open the Speaker Battery cover to
replace all 4 pieces AA size alkaline
batteries as shown in figure 5. When the
Display unit is not in use, please remove
those AA size batteries from the
compartment to prevent battery leakage.
THE WARRANTY DOES NOT
COVER THE BATTERIES.
