D.
Copyright and Compliance
Copyright 2010 DIG Corporation. All rights reserved. LEIT RC2ET, LEIT-2ET,
LEIT WWS and LEIT WWSE are each trademarks of DIG Corporation.
Patent Pending.
FCC, IC and CE certified, Australia and Hong Kong compliance
To comply with FCC RF exposure compliance requirements, the antenna used for this
transmitter is installed to provide a separation distance of at least 8 inches (20 cm) from all
persons (not including hands, wrist, feet and ankles) and must not be colocated or operating in
conjunction with any other antenna or transmitter.
This device is required to comply with FCC RF exposure requirements for mobile and fixed
transmitting devices. This model transceiver generates and uses radio frequency energy.
If not installed and used in accordance with the manufacturer’s instructions, it may cause
interference to radio and television reception.
CONTROLLER FCC ID: UJV-LEIT01
IC: 6694A-LEIT01
HANDSET FCC ID: UJV-LEIT02
IC: 6694A-LEIT02
WEATHER STATION FCC ID: UJV-LEIT03 IC: 6694A-LEIT03
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy. If not installed and used in accordance with the
instructions, the remote may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult DIG technician for help.
Warning:
the user should make no field changes or modifications to the LEIT-2ET controller,
LEIT RC2ET handset, LEIT WWS or LEIT WWSE weather station. All adjustments and changes
must be made at DIG’s facility under the specific guidelines suggested in our instruction manual.
Any tampering or modification to the equipment will void the users authority to operate the unit,
render the equipment in violation of FCC part 15 and will void the warranty.
5
