DIG LEIT RC2ET, Instruction Manual

Page: 19 / 48

19
b. Manual Temp
Manual Temp is useful for applying additional water for a defined irrigation period.
In the CONTROLLER MENU screen press and highlight MANUAL RUN icon.
Press and MANUAL RUN MENU screen appears. Press then and
highlight MANUAL TEMP icon.
Press to connect. (If the controller is active, a screen will display Program
Running or Manual Run Active. In order to use Manual Temp, the running
program must be suspended by pressing again.) If the program is
suspended CONNECTING appears briefly, then CONNECTED and then the
MANUAL TEMP screen with the valve number, the hour digits blinking within
valve # 1 appears. To set a defined irrigation period press or and set
the hour digits, then press and set the minute digits. Repeat the steps for
Valve #2. Press to connect, ARE YOU SURE? screen appears. Press
again to initiate a temporary program. When finished select the EXIT icon by
pressing or . Press to exit.
10:00 10:00 10:00
10:00
10:00
10:00 10:00 10:00 10:00
10:00 10:00 10:00
10:00
10:00
10:00 10:00 10:00
10:00
10:00
10:00
10:00 10:00
CONTROLLER MENU
MANUAL RUN CONNECT CONNECT
UPLOADING CONNECTED
MANUAL TEST MANUAL TEST
CONNECT CONNECT
CONNECTING CONNECTED
YES/NO
MANUAL RUN CONNECT CONNECT
UPLOADING CONNECTED
MANUAL TEMP
MANUAL TEMP
CONNECT CONNECT
DOWNLOADING CONNECTED
CONNECT
UPDATE
SUCCESSFUL
CONNECT
UPDATE
SUCCESSFUL
YES/NO
MANUAL RUN EXIT
ARE YOU SURE?
ARE YOU SURE?
TURN ON
SKIP TO NEXT
MANUAL TEST
TURN OFF
SKIP TO NEXT
00:00
00:00