9. SETTING WATERING RUN TIMES
Note:
If you have already set a SimpleSmart
™
ET preset (example: SP02) and then
change the run time, your SimpleSmart
™
program will be turned OFF. You must
reactivate the SimpleSmart
™
programming each time you adjust your run time
(see section 10).
This setting determines the length of time the ECO 1
™
smart controller will allow
the valve to remain open (duration is from 1 minute up to 6 hours). For example,
setting watering run time to 10 minutes on certain days of the week will program
the controller to turn the water on for 10 minutes on each of the days chosen and
at every start time selected.
To set the watering run time :
1. Press the
button until the icon appears and OFF or the last run time
setting appears.
2. Press the
button, and OFF (or the last run time programmed) appears with
hours blinking.
3. To set a desired watering run time in hours, press
or
and select the
number of hours.
19
