D
1
D
2
D
4
D
3
D
5
D
6
D
Assembling the Difrax Breast pump
Assemble the splitter
D
according to the diagram below:
Splitter
D
D1. Cap
D2. O-ring
D3. Float switch O-ring
D4. Float switch
D5. Screw cap
D6. Milk valve
Figure A
Figure 1
1) Assembling splitter
D
.
a) Insert ring D2 into cap D1.
b) Place the float switch O-ring D3 onto float
switch pin D4.
c) Place the float switch D4 with O-ring D3
downwards into cap D1.
d) Turn screw cap D5 onto cap D1.
e) Place milk valve D6 in the bottle (see figure A).
Tip:
Shake the
splitter
D
for a few seconds.
Can you hear it rattling? That means it is fitted correctly.
f) Screw the
splitter
D
onto
the bottle.
2) Connecting the milk tube.
Push one end of the
milk tube
E
all the way
on the connector on the side of the
splitter
D
displaying the word ‘Milk’.
Push the other end of the
milk tube
E
all the way
on the connector on the
outer shell
B
.
Tip:
The tip of the
milk tube
E
is white.
3) Connecting the air tube.
Push one end of the
air tube
F
all the way on the
connector above the
splitter
D
displaying the
word ‘Air’.
Remove the protective cap
N
from the
pump
A
(Store the protective cap in a safe place for
transporting the breast pump).
Connect the
S-baby bottle
G
to the
pump
A
by
clicking the edge of the bottle sideways into place.
Push the other end of
air tube
F
on the connector
on
pump
A
.
UK
7
UK
6