background image

41

DE

EN

FR

IT

NL

07 SAFETY INSTRUCTIONS

07 SAFETY INSTRUCTIONS

 

t

Before any movement, verify that the 
brakes are functioning properly.

 

t

Observe the road traffic regulations 
when moving in road traffic.

 

t

Wherever possible, wear light, eye-
catching clothing. You will then be seen 
more easily by other road users.

 

t

Do not use high-pressure cleaners or 
strong, corrosive chemicals for cleaning 
purposes.

 

t

Avoid exposing the wheelchair to direct 
sunlight / low temperatures for long 
periods of time, as parts of the product 
(eg frames, footrests, brakes and side 
panels) may become very hot (> 41° C) 
or very cold (<0°) and may cause skin 
injuries.

 

t

Always remember that there is a risk of 
fingers or other parts of the body getting 
caught in any of the moving parts 
(brakes, leg rests, etc.). For this reason, 
operate the wheelchair with care.

 

t

Ensure that the wheelchair is not parked 
in direct vicinity of emergency exits and 
escape routes and blocks them.

 

t

The CANEO_E is tested according to ISO 
standard 7176-19 and is therefore 
approved as a seat for transporting 
people in a car. Please refer to chapter 
„Transport“ for these specific safety 
instructions.

Summary of Contents for CANEO_E

















































Reviews: