Dietz Rehab tauron rsi XXL, User Manual

Page: 14 / 48

14
DIETZ GmbH / User manual XXL manual wheelchair tauron|rsi / Version 4.0.0 EN
03 SETTING UP THE WHEELCHAIR
3.7 Adjusting the back seat width
The back seat width of the tauron|rsi can be
adjusted using the side clamps at the back.
1. Firstly loosen the locking lever of the front
clamp. (1, Fig. 10).
2. Loosen the two socket head screws in the
calf pad holder (1, Fig. 11) and the rear (2,
Fig. 11) side panel clamp.
3. Now turn the rear clamp to the desired po-
sition. (1, Fig. 12). Support and guide the
front clamp when sliding (2, Fig. 12) on the
side frame and press it slightly upwards.
4. Then secure the Allen screws in the back
clamp. Press the front clamp slightly up-
wards so that the pin of the side panel is
flat. Finally, secure the two Allen screws in
the front clamp.
Fig. 10
Fig. 11
Fig. 12
1
1
2
1
2