Dieter Knoll Collection DK5HV471Y, User Manual

Page: 7 / 12

When the function is turned on,
additional touch on the button
does not have any effects.
Activating and deactivating the
filter notification
Filter alarm reminds to change or clean
the charcoal filter and clean the grease
filter. The filter indicator is turned on
(red) for 30 seconds if the grease filter
must be cleaned. The filter indicator
flashes (red) for 30 seconds if the
charcoal filter must be replaced or
cleaned.
Refer to filter alarm in care and
cleaning chapter.
1. Switch on the control panel.
2. Make sure that the icons are turned
off.
3. To activate or deactivate the charcoal
filter notification touch the button for
3 seconds.
If the charcoal filter notification
is activated, the filter icon
flashes (white) for 5 seconds.
If the charcoal filter notification
is deactivated, the filter icon
remains fixed (white) for 5
seconds.
CARE AND CLEANING
Cleaning the grease filter
Each filter must be cleaned at least once a
month. Filters are mounted with the use of
clips and pins on the opposite side.
To clean the filter:
1. The cover is held by two magnets. Pull
the cover to open it.
1
2. Press the handle of the mounting clip
on the filter panel underneath the hood
(1).
1
2
3. Slightly tilt the front of the filter
downwards (2), then pull.
Repeat the first two steps for all filters.
4. Clean the filters using a sponge with
non abrasive detergents or in a
dishwasher.
The dishwasher must be set to
a low temperature and a short
cycle. The grease filter may
discolour, it has no influence on
the performance of the
appliance.
5. To mount the filters back follow the
first two steps in reverse order.
Repeat the steps for all filters if applicable.
7