2.
3
D
IMENSIONS
3 I
NSTALLATION PRECAUTIONS
3.1 I
NSTALLATION
IZAR RE TEMP module may be installed in different environments (except full immersion).
This product is cast in resin and can be placed outside without any protection.
The sensor must be installed in an appropriate place corresponding to the desired unit of
temperature measurement (center of a room, without direct exposure to sunlight…).
3.2 S
ECURING SYSTEM
IZAR RE TEMP module may be installed in different ways, to suit various environments.
The standard installation is as follows:
To remove the module, carry out the steps of the operation in reverse order.
Fix IZAR RE 868 TEMPERATURE onto a wall with 2 screws (provided with the
module), then slide the module
onto
its
support
structure. Adjust
the
orientation of the module vertically or horizontally.
Mounting rail
Support structure to
be fixed on the wall
2x
0
3
/201
6
IZAR R
E 868 TEMP |
3
fig.1
fig.2
Caution:
The product must be installed and used in full compliance with the instructions
given in this technical manual.
The fitter shall be liable for any operation or installation that does not
comply with good installation rules and instructions, and Diehl Metering
disclaims all liability in this respect.
English