- 12 -
IZAR RECEIVER BT 868/434
Deutsch
English
6.
Start-Up
Mount the supplied antenna onto the SMA connector
of the IZAR RECEIVER BT.
Make sure to tighten the antenna slightly by
hand. When too much force is applied, the
thread may be ripped off the PCB!
Before the initial operation, please charge the
built-in NiMH battery of the IZAR RECEIVER BT.
Charging
Only the supplied battery charger may be used
for charging the built-in NiMH battery.
When using unsuitable battery charger, the built-
in NiMH battery may be destroyed.
Plug the supplied battery charger in a socket and con-
nect the charging plug to the charging socket of the
IZAR RECEIVER BT.
A red LED (PW) and a yellow LED (CH) light up on the
IZAR RECEIVER BT. The IZAR RECEIVER BT has to
stay connected to the battery charger until the yellow
LED (CH) is off.
The built-in NiMH battery reaches its maximum capacity
only after two or three complete charge and discharge
cycles. For that reason, disconnect the IZAR RECEIVER
BT after the first two or three full charging cycles from the
battery charger and discharge completely by normal use.
