Horizontal-Schrumpfgerät
Horizontal Shrinking Device
HS 1100-P
BA_79-E.docx
Copyright © Diebold 2017-04 Ersteller: kh
Seite 41 von 60
19.
Operating the HS 1100-P
19.1.
Ferrite Interchangeable Discs
Ferrite interchangeable discs are used for the effective heat shrinking process and are
necessary for shrinking of Carbide and HSS tools. The discs will concentrate the
magnetic field in a way so the tool holder will open up faster. The interchangeable discs
are inserted in the RH side of the coil and locked in place with a clockwise turning
motion. They will serve as a limiter for the toolholder.
A complete set of interchangeable discs comes with the unit.
19.2.
Shrinking Process
The shrinking and un-shrinking of a tool works as:
Clamp the shrink chuck in the tool adaptor
Move the induction coil to the required shrink position and lock it by turning the
lock handle
Select shrinking parameters (see 19.4)
Start the heating process by pressing the “Start/Stop” button. When the heating
cycle is completed, push the tool in or pull out the tool.
The induction coil may now be pushed back and the (hot) shrink fit chuck may be
removed for cool down.
Always use the gloves supplied with the unit.
ATTENTION! To prevent damage to the device, the induction coil
should never be moved relative to the chuck during the shrinking
process.
