1
Terminal
2
Cencon 2000 electronic lock
3
Direction to turn dial (counterclockwise)
4
Display
5
Factory-set combination
6
Safe door in open position
7
Safe handle
8
Mechanical keylock
Figure 3-12 Opening Safe Door with Cencon 2000 Combination Lock (sheet 2 of 2)
3.12.2 Closing the Safe Door
Perform the following steps to close safe doors with a Cencon 2000 lock.
1. Use the safe handle to close the safe.
2. Spin the lock dial to the left until a DL code appears to close the lock bolt
and lock the safe door shut. See Figure 3-13.
3. If a mechanical key lock is present, insert the key into the key slot of the
mechanical key lock and turn the key counterclockwise 180 degrees.
4. Remove the key from the lock.
5. Make sure that the safe handle will not turn.
6. Pull firmly on the safe door to confirm that the safe is secure.
3-26
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (4/2020) - All Rights Reserved
TP-821811-001C