3.12 Opening and Closing Safe Doors with Cencon 2000 Lock
3.12.1 Opening the Safe Door
Perform the following steps to open safe doors with a Cencon 2000 lock.
NOTE
If the safe has a Cencon lock, there is a self-closing feature that
closes the door bolt work and handle automatically when the
safe door is closed. In the past, the safe door could close, but
the bolt work and door handle were not closed if the handle
was not turned to the closed position. Now, when the safe door
closes, the safe door bolt work closes and the handle turns
automatically. To reopen the safe door, the combination must
be reentered.
1. Insert the key into the lock for the safe door cover.
2. Turn the key clockwise and open the safe door cover.
3. Spin the lock dial left to generate electrical power to operate the lock
keypad until the DL code appears on the lock display.
4. Once the keypad is energized, an EC code appears. Enter the lock code
on the keypad.
5. After entering the correct code, spin the lock dial to the right until it stops
and an OPR code appears on the lock display, to open the lock bolt.
6. Use the safe handle to open the safe.
3-27
Copyright ©Diebold, Incorporated (7/2015, 3/2017) - All Rights Reserved
Copyright ©Diebold Nixdorf (2020) - All Rights Reserved
TP-821810-001C
