didimerge D17800 Series Instruction Manual Download

Page: 40 / 96

System Menu

SYSTEM MANAGEMENT

Firmware Update

New firmware is periodically available for
download from the www.Digimergecctv.com
website. The firmware on the unit can be
updated via the USB Port:

• Download the new firmware from the

website. Copy the files from the PC to
the USB Memory Stick.

• Insert the Memory Stick into the System.

Select the ‘Firmware Update’ option by
selecting the PRESS button.

• The USB device will be recognized by

the system - Press the START button to
display the available firmware.

• Select the Firmware and press ENTER.

A prompt will appear confirming the
Update.

• Press OK to begin the update process.

• The System must be restarted for the

Changes to Take effect. Press OK, and
exit the Menu. The System will
automatically Reboot.

NOTE: The System will need to be
rebooted once the firmware has been
updated for the new changes to take
effect.

The DDNS Settings will need to be
re-entered after the Firmware
upgrade.

Summary of Contents for D17800 Series

































































































Search results

Summary of Contents for D17800 Series

Reviews:

Related manuals for D17800 Series

Brands by name

Popular brands

didimerge D17800 Series, Instruction Manual

Search results

Summary of Contents for D17800 Series

Reviews:

Related manuals for D17800 Series

Brands by name

Popular brands