Dicota Stow, User Manual

Page: 5 / 47

2. Establishing a connection between the mouse and the RF receiver
The following steps have to be carried out within 15 seconds if a success-
ful connection is to be established between the mouse and the RF
receiver. Ensure that the mouse is no further than 1.5 m away from the
RF receiver.
1.) Connect the RF receiver to any free USB port on your computer.
The Plug & Play function of your system will automatically detect that
a new device has been connected. The mouse will not yet be ready to
use at this stage.
2.) First, press the Connect button on the receiver that shown as step 1 .
3.) Then, press the Connect button on the bottom side of the mouse
as step 2 .
4.) After a few seconds your mouse will be ready for use.
3. Sleep mode
The mouse will switch to power saving mode after 3 seconds while
working. If not used, it will power off automatically after 8 minutes to
extend battery life. The mouse will be activated again with one mouse
click.
Note on handling batteries
• Keep batteries out of children’s reach.
• Do not mix old and new batteries or use different types of battery.
• Replace old or weak batteries promptly.
• Dispose of and recycle your old batteries in accordance with local
regulation
1.
2.
…then press the
transmitter’s ID button
First press the
receiver’s ID button…