05 Main Menu (Page 7)
Extended Functions Menu
Heater Menu
Settings related to the heater or coil
Mod Menu
Settings related to the individual usage and appearance
Value Menu
Provides several statistics of vaping
The Extended Functions Menu provides three logically grouped sub-menues:
Error Messages
If an error occurs, the mod directly jumps to the error menu and displays the error
number and a mnemonic (short-term) description.
The possible error messages are:
The Extended Functions Menu offers a lot of setting options of the mod, to provide the highest possible
flexibility for the user to individually adjust it to whatever preferences. Normally, once the settings were
made, the user will need to change the parameter rarely. In order to keep the main menu as short as
possible, the extended functions menu was created.
The many options may frighten some of the users initially. But without the extended functions menu
the mod would not be able to address all different customer requirements. Please take a bit of time to
get familiar with the menu. We are sure, as soon as you have gained an overview, the individual setup
is a walk-over.
0 OvrVolt:
The input voltage is too high. The
are prepared for the use of one battery.
If the input voltage exceeds 4.5V this error message is displayed. Reduce the input
voltage to the specified range.
1 ChkAtom: No atomizer detected or open coil.
2 TempRef: A problem during the temperature reference measurement occured
3 N/A
4 OverCur:
Short on coil or coil breakdown (open)
5 LowBat:
The battery voltage under load (with current drained from it) has reached the minimum
discharge level, defined with parameter UbatMin in the extended function mod-menu.
6 EleHot:
The electronics have heated up too much and needs to cool down. This error will not
occur with normal usage of the mod.
7 TimeOut: The maximum puff-time is limited depending on power. For a power <20W it is 20
seconds. Above 20W it decreases by 0.5seconds per Watt, above 40W it is 10seconds.
8 LowR:
In Bypass mode the coil resistance is too low.
dicodes Dani Boxes
Diagram for Boost-Function
Boost-Time=1-5
Boost-Time=6..10
Fire Button
Power
Boost-Pwr
Power
Time
Time
Power
Fire Button
Boost-Pwr