OPERATOR’S MANUAL
mini GAC
®
11001-1464A-201701 Rev B
6 / QUICK START GUIDE
IMPORTANT: A slight tilt when holding and testing grain is
acceptable. If tilt is more than 10 degrees, an
error warning is possible.
10. When grain test completes, press
Enter
to store the results.
Press
Enter
again to see the average of all samples and
press the
Up or Down Arrows
to scroll through all previous
readings.
11. Press the
Home
button to return to the Home menu.
IMPORTANT: Refer to the Error Codes and Troubleshooting
section if an error displays after a grain test.
Figure 5
Scoop, Pull Slide, Strike Grain
Use care when handling the mini GAC unit. Any misuse of
the unit, such as tossing, dropping, or throwing, can
potentially damage the internal measuring device. The
unit should be stored in the case when not in use.
1. Scoop 2. Pull Slide
3. Strike Grain
