10
renders, we strongly suggest to use the
Renderer in command line mode
.
ReSamplerBufferSize
. This is the
ReSampler Buffer Size in number of
samples.
UpSamplingFactor
. This is the
UpSampling Factor applied to the base
input SampleRate. Use it to increase the
quality or your playbacks and renders,
but take into account that high
UpSampling factors correspond to
more samples to be processed, and
consequently longer processing times.
UpFilterTransBand
. This is the
UpSampling Filter Transition Band, in
percent of the spectral space of the
input signal between filter's -3 dB point
and the Nyquist frequency.
UpFilterType
. It defines the UpSampling
filter's phase response: Minimum Phase
or Linear Phase.
DownFilterTransBand
. This is the
DownSampling Filter Transition Band, in
percent of the spectral space of the
output signal between filter's -3 dB
point and the Nyquist frequency. If you
are working at sample rates higher
than 44100/48000Hz, we suggest to
increase it to 43% to have a smoother
low pass filter without impacting the
audible frequencies.
DownFilterType
. It defines the
DownSampling filter's phase response:
Minimum Phase or Linear Phase.
PreRenderFactor
. Together with input
SampleRate and UpSamplingFactor,
PreRenderFactor affects how many
samples will be pre-rendered by the
model before the real processing. We
suggest to set it to the highest value –
32x – in Offline mode.
DONE
. It closes the SET window.
TWEAK
TWEAK window
The TWEAK window gives you the
power to modify every single
component of the circuit. Even the
