WWW.DIAQUIP.CO.UK
/07
INTRODUCTION
This machine is for the intended purpose of diamond core
drilling of concrete, masonry, stone and similar materials.
It must always be mounted on a drilling stand. This machine
is for professional use only and only trained personnel may
operate this machine. All other uses which are not for the
intended purpose are prohibited.
It is equipped with a water feed system which is required for the diamond core drilling process.
A PRCD interrupter (portable residual current device) which must be used at all times.
It is equipped with a three or a four speed mechanical gearbox (depending on model) for
different core drill size ranges and features a mechanical safety clutch. The motor has
electronics for soft start, overload protection and thermal (overheating) protection. There is a
pulse function overload warning to alert the operator of load and
overload conditions.
The machine is equipped with spirit levels which aid in aligning the
tool. By positioning the machine so that the bubble is in the center
of the window one can drill a straight hole. Use the Tubular Level for
horizontal aligning.
DRILL SAFETY WARNINGS
WARNING: Incorrect clamping and positioning of the drill core bit may lead to
dangerous situations by broken and ejected parts of the drill core bit. Core bits
must be assembled correctly. Follow the instructions below under “Fastening the
Core Bit”
WARNING: It is necessary to always wear suitable personal protective equipment,
including:
Hearing protection, to reduce the risk of induced hearing loss,
Gloves, when handling core bits or rough materials, to reduce injuries by
sharp edges,
Safety glasses, to prevent injuries by flying particles,
Non-slipping footwear, to prevent injuries caused by slippery surfaces;
WARNING: A wrongly assembled machine may cause a hazardous situation. Follow
the instructions provided with the drill stand on how to fix the machine into the
stand and fixing to the material to be drilled; See also the instructions below under
“Mounting to a Drilling Stand”
Tubular Spirit Level
