17
COMPONENT NAMES (continued)
Remote Control
SOURCE SELECT
POWER ON / OFF
ZOOM
CCD (Close Caption Display)
SWAP
CH UP/DN (
)
MUTE
LAST-CH
MTS (Optional)
NUMBER KEYPAD
RGB-2 DVI-D
SLEEP
CH-LOCK
ASPECT
PIP
VOLUME UP / DN (
)
PROGRAM / ADJUST (
)
DISPLAY
AV2
AV1
RGB 1-VGA
TV TUNER(Optional)
LED INDICATION
STILL
MENU
SELECT (
)
AV3
AV4
ENTER
1. Open the battery cover.
• Slide back and remove the battery
cover in the direction of the arrow.
2. Installing the batteries.
• Install two included Size AA
batteries observing the correct
pola,-).
3. Close the battery cover.
• Replace the battery cover in the
direction of the arrow and snap it
back into place.
Use the remote control within about 16 feet from front of the unit’s
remote-control sensor and within 30 degrees on both sides.
• Do not mix new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When inserting batteries, observe their correct polarities as
marked on the product. If inserted in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.
Installing the Batteries
CAUTION
ATTENTION
• Do not drop the remote control.
• To avoid possible failures, do not splash the remote control with
water or put it on a wet object.
• If leaving the remote control out of use for an extended period of
time, remove the batteries from it.
• If the remote control does not respond properly, replace the
batteries.
• Strong light such as direct sunlight exposed on the photoreceptor
of the remote control can cause operational failure. Position this
unit to avoid direct contact with such light.
Handling the Remote Control
Within 30
degrees
About 10 feet
Within 30
degrees
About 10 feet
About 16 feet
