14
E
N
GLISH
(1) Make sure that the power switch of the Display is turned off.
(2) Make sure that the power switch of the Video component is turned off.
Applicable video signals for each input terminal
(See page 42~45 for details)
Terminal
RCA
DVI
D-sub
Remarks
Type
Composite
S-video
Component
PC/STB
RGB
AV1
O
O
Refer to P21
AV2
O
O
Refer to P21
AV3
O
480i Video Signal only
AV4
O
1080i/720P/480P/480i inputs.
Refer to p21
RGB1
O
Refer to p21
RGB2
O
Refer to p21
INSTALLATION INSTRUCTIONS (continued)
Connecting to Video Components
Display rear panel
With DVI-D and RGB component setup
To component video
equipment.
Please use the connection
cable suitable for your video
equipment.
[An example of connecting video components]
• If the OUTPUT (MONITOR) terminal is connected to a 2nd monitor,
it is possible to view the same image as on the main source. The
composite video signal from AV1, AV2 input will be displayed on
both screens at the same time.
(O: Available)
