Page 8
For technical questions, please call 1-888-866-5797.
Item 64684
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Functions
Bevel
Lock Lever
Water
tray
Water
tray
Frame
Water
pump
Miter
Gauge
Drain
plug
pump
Basin
pump
power
cord
Stand
(sold separately)
Toggle Table
Stop
table
Spindle
Lock
rear
Extension
tray
Reset
Button
pump
Outlet
power
Switch
power
cord
Depth
Lock
Depth
Stop
Depth
Knob
Table
Lock
Lever
Extension table
Lock Knob
Extension
table
Side
Extension
tray a
Blade Guard
Lock Knob
Side
Extension
tray B
Blade
table
Stop
reset Button:
Directly above the Power Switch is
the Reset Button. If the Tile Saw overheats it will shut
down automatically. Allow it to cool down, make sure
there are no loose connections or damaged cords,
and then press the Reset Button to restart the Saw.
Do not force workpieces into the saw and make sure
the blade is properly wetted to reduce overheating.
toggle table Stop:
This allows the Table to be
removed if needed. Lift the Stop and turn it to
lock/unlock. If the slot is aligned with the Table,
the Table can be removed. If the slot is turned
sideways, the Table is locked into the saw.
table Lock Lever:
To lock the Table in place,
line up this Lever′s pin with the hole in the
rail, and press the Lever towards the rail. Pull
out on the Lever to unlock the Table.
