A noncombustible
granit, sandstone, concretes,bricks, ceramic wallfacing tiles,
plaster
B uneasily combustible
akumine, heraklite, lihnos, itavere
C1 hardly combustible
leafy wood, plywood, sirkoklit, rare paper,formica
C2 middle combustible
fibreboards, solodure, cork boards, rubber,floor-
coverings
C3 easily combustible
wood-fibreboards, polystyrene,polyurethane, PVC
Devices must be instalated in a safe way. When instaling you must respect corresponding
project, safety and hygienic orders according to:
•
Č
SN 061008 fire protection of local devices and sources of heat
•
Č
SN 332000 surrounding for electric devices
CONNECTION OF THE ELECTRIC CABLE TO THE ELECTRICITY
Instalation of electric feeder - This feeder must be separetely protected by a safety fuse
according to the specific electric stream which depends on the wattage of the instaled device.
Check the wattage on the label at the back of the device. Connect the device directly to the
electricity but you must put the switch between the device and electric net. The switch must
be placed in min. distance 3 mm between the particular contacts according to the standards
and loading. The feeder of grounding (yellow- green) cannot be interrupted by this switch. In
every case feeding cable must be placed so that no point of the cable will reach the
temperature which is 50°C higher than the temperature of the surrounding. Before connecting
the device check that:
•
safety fuse of the feeder and inner mains can stand the loading of the device (see label
of the matrix)
•
mains are equipped with effective grounding according to standards (
Č
SN) and
conditions given by law
•
socket or switch of the feed is well accessible from device
6
