Diamond ST40A/D-N Manual Download Page 4

PACKING AND DEVICE CHECK

 

The device leaves our stocks properly packed with appropriate symbols and labels. There are 
also appropriate instructions for use. In case the packing shows bad handling or damage, it 
must be reclaimed at transporter immediately by writing and signing of a damage protocol. 

Important notice 

• 

this instructing guide must be read properly and carefuly because it contains important 
information about safety elements, instalation, use 

• 

these recommendations refer to this product 

• 

this product corresponds with valid standards 

• 

this guide must be properly deposited for future use 

• 

keep the children away from manipulation with the product 

• 

when selling or moving the product to another place it is necessary to make yourself 
sure that the staff or the professional service has got acquainted with control and 
instalation instructions from enclosed guide 

• 

only authorised person can operate the product 

• 

the device can be used only for toasting and baking food 

• 

it cannot be switched on without supervision 

• 

we recommend to have the product checked by proffesional service min. once a year 

• 

only original spare parts can be used for repairs 

• 

the product cannot be cleaned by the water jet or pressure shower 

• 

by damage or break down disconnect all the feeders (water, gas, electricity) and call 
proffesional service 

• 

producer refuses any responsibility in case of damages caused by wrong instalation, by 
disobserving of above mentioned recommendations or by other use etc. 

 

INSTALATION 
 

Technical instructions for instalation and regulation can be used ONLY by specialized 
technicians following instructions apply to the technician specialized in instalation to do all 
the operations in the most correct way and according to the valid standards. 

 

4

Summary of Contents for ST40A/D-N











Reviews: