background image

CLEANING AND MAINTENANCE 

ATTENTION! The device cannot be cleaned by direct or pressure water.Clean it daily. Daily 
maintenance keeps longer useful life and efficiency ofthe device.

 

Before cleaning make sure 

to have disconnected the device from electricity. Always switch off the main feeder to the 
device. Stain-less parts wash with moist cleaning cloth and detergent without grooveparts than 
dry it by the cloth. Do not use abrasive and corrosive detergents. 

What to do in case of break-down: 

Switch off the electric feeder and call seller´s 

proffesional service. 

Indication 

Guarantee does not cover all consumption parts succumable to common wear (rubber seals, 
bulbs, glas and plastic parts etc.). The guarantee does not refer to the devices which were not 
instaled in correspondancewith instructions - by qualified worker, in confirmity with 
standards andwhen somebody handled incompetently the device (interventions intoinner 
equipment) or the device was operated by nonqualified staff or at variance with instructions 
for use. Guarantee does not also cover the damages caused due to influance of nature or other 
outer intervention. 

  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

7

Summary of Contents for SFE12/D-N










Reviews: