background image

 

 

Important safety instructions 

 

1.

 

To obtain full use of the cabinet, we recommend reading this instruction manual. 

2.

 

It is the user’s responsibility to operate the appliance in accordance with the instructions 
given. 

3.

 

Contact your dealer immediately in case of any malfunctions. 

4.

 

Place the cabinet in a dry and ventilated place.  

5.

 

Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct 
sunlight. 

6.

 

Always keep in mind that all electrical devices are sources of potential danger.  

7.

 

Do not store inflammable material such as thinner, gasoline etc. in the cabinet.  

8.

 

We declare that no asbestos nor any CFC are used in the construction. 

9.

 

The oil in the compressor does not contain PCB. 

 
 

Unpacking and installation 

 
Remove the wooden pallet and the packing. External surfaces are supplied with a protection foil, 
which must be removed before installation 
 
To ensure correct function it is important that the cabinet is level. The cabinet is supplied with legs, 
these can be adjusted. See fig. 1.1. 
 

Fig. 1.1 

 

 
 

 
 
 
 
 
 
 
 
 
 

UK 

Summary of Contents for SB2/BD






Reviews: