5
Security
Fig.1
Using Instructions
Maintenance and Clean
KN
TN
Irregularities and Reparations
- The automatic security switch guarantees the functioning of the heating-element only if
the control panel was fitted.
- In the control panel there is a security thermostat that disconnect the appliance when
happen
a super heating, which can happen by oil missing.
- The oil level should be above the minimum level indicated. Fire hazard when the oil
level is below indicated minimum level.
- Check the oil saturation. The saturated oil has a lower flashpoint and will be more
easily susceptible to sudden boiling.
- The valve (
) it is equipped with a device of safety.
- Take off the basket and put the handle on it.
- Pour oil into the bowl till the max.
- Connecting the appliance to a wall socket with earth connection.
- Select the temperature to fry with the regulable thermostat and wait that oil reaches
the selected temperature (putting out the signal light the oil is ready to fry).
- Prepare and put the food to fry into the basket.
- When the oil be hot put the basket into the recipient slowly to avoid oil leakage and
Splashes.
- When you finish frying, take off the basket from the recipient and suspend it, so that
the oil excess can drain from the food.
- Before making some cleaning operation, disconnect previously the appliance.
- Let the oil to get cool.
- Take off the basket and the control panel.
- Pour carefully the oil into a recipient (or on the kitchen sink).
- Never submerse the control panel into the water or any other liquid. Use only a wet
towel to clean the device. Never use water jet.
- Clean the control panel and the cable with a wet cloth , but never with abrasive
product.
- The basket, the cover, the bowl and the body can be clean on the dishes-machine.
- The models
and
is equipped with valve to facilitate the emptying of the vat (oil),
fig.1.
In case of damage of connection to the electric current, don't try to repair it; take the
appliance to the authorized Technical Service once for that is necessary special tools.
The same thing is necessary to do, in case of some other irregularity.
- If the power supply cord will be damaged, only manufacturer, authorized agents or
qualified people for the job can substitute it to avoid dangerous situations.
This appliance fulfils the principles of the Directive 73/23/CEE of Low Tension and the
Directive 89/336/CEE of Electromagnetic Compatibility.
