9
Windows Millennium Edition (Windows ME)
The first time you start Windows with a new monitor; the system will detect it
and automatically start the
Add New Hardware
wizard.
1. Insert the
Diamond View LCD Monitor Utilities
floppy disk into your
floppy disk drive. Select the
Floppy disk drive
check box and click
Next
.
2.
Select Search for the best driver for your device (recommended)
,
tick the
Removable Media (Floppy, CD-ROM…)
and click
Next
.
3. Click
Next
again and then
Finish
to complete the installation.
Windows 2000
The first time you start Windows with the new monitor; the system will detect
it and automatically load the native Plug & Play driver. To install the driver
from the Utilities floppy disk, please do the following:
1. Click on the
Start
button, go to
Settings
and select
Control Panel
.
2. Double click on
Display
, then click on the
Settings
tab at the top of the
window that appears and select the
Advanced
button.
3. Click on the
Monitor
tab, and select
Properties
.
4. Click on the
Driver
tab at the top of the window, then select
Update
Driver.
5. Click
Next
, then select
“Display a list of the known drivers, so that I
can choose a specific driver”
and click
Next
.
6. Select
Have Disk…
,
then use
Brows
e, navigate to the floppy drive,
highlight the
MEA DV190
driver and click
Open
and
OK
.
7. Highlight the monitor driver in the
Models
list and click
Next
. If a
windows appears stating that
“the digital signature was not found”,
click on
Yes
.
8. Click
Finish
to complete the driver installation.
Windows XP
The first time you start Windows with the new monitor; the system will detect
it and automatically load the native Plug & Play driver. To install the driver
from the Utilities floppy disk, please do the following:
