Diamond View DV150, User Manual

Page: 10 / 27

Getting Started
4
2
This chapter helps you install your monitor.
Installing the Monitor
This monitor is equipped with an auto-sensing AC adaptor
power supply for voltages of 100~240V AC, 50~60Hz.
1. Make sure that the
computer system is
turned off.
2. Plug the signal cable
into the signal
connector at the rear of
PC.
3. Plug adapter output
cable to the jack at the
rear of LCD monitor and
the power cord to the
adapter.
4. Connect the power cord
to power source.
5. Turn on the computer and
the monitor.