15
DIA MON D V IE W
Aut o Exit Enter
Auto Exit Enter
Auto
Automatically adjusts the vertical position, pixel phase,
horizontal position and pixel clock.
Exit
Return to the main menu or exit the OSD menu without saving.
Press the exit key when the OSD is not displayed to adjust the
audio volume.
Enter
Enter sub-menus, select items, save changes.
(decrease) Reduce the value of a setting. Move the selection cursor to the
left. Press to adjust Contrast if the OSD is off.
(increase) Increase the value of a setting. Move the selection cursor to
the right. Press to adjust Brightness if the OSD is off.
To manually adjust the image:
1. Display the adjustment test pattern. This is the best way to observe changes
as you adjust the image. Windows users should run the Auto.exe test pattern
program provided on the Utilities floppy diskette. For non-Windows operating
systems, you can use the test pattern described in the previous section or
another full-screen image, for example the desktop of the operating system.
2. Open the OSD menu by pressing the
Enter
button on the monitor.
3. Press
or
to select the
Geometry
submenu and then press
Enter
.
4. Press
or
to select
Clock
and then press
Enter
.
5. Check the current setting. Increase or decrease the sampling clock to get the
optimum picture. Look at the centre section of the test pattern that has
