Stevie User Manual Rev 1.03
Page 37
4.
Download the Stevie baseboard Image file
Stevie-release-0.1-20190627.tar.gz
from
the FTP (File Transfer Protocol) site and copy it to the Linux Host Machine.
Figure 12-2: Stevie Release Image File Displayed on Screen
To unzip the copied Image file:
5.
Type and
Enter
the following command depicted in the Screen below. It may take a few minutes
for the file to unzip.
sudo tar -pxvf stevie-release-0.1-20190627.tar.gz
NOTE
: The
tar.gz
file name is liable to change according to the version and release date.
Figure 12-3: Image File to be Extracted Screen
To switch to the directory where the file has been extracted:
6.
Type and
Enter
the following command as depicted in the Screen below.
cd Linux_for_Tegra
Figure 12-4: Image File Switch Directory Command Screen
To verify the baseboard is in Recovery Mode, in the Host PC running Ubuntu Operating System version
16.04 Terminal:
7.
Type and
Enter
:
lsusb
