background image

User Manual 

Page 37

 

of 40 

 

SHIPPING  

Starting June 1st 2009 Diamond Multimedia will pay for shipping cost from Diamond back to US and Canadian 
customers provided the product is indeed under warranty and there is no damage caused by improper installation 
or modification of the merchandise. Customers located outside of the United States and Canada or using military 
addresses  (APO,etc)  will  be  required  to  pay  for  return  shipping.      Average  shipping  times  range  from  5  to  10 
days, depending on actual shipment destination. Shipments made outside the US may take longer to deliver.  
 
Diamond Multimedia reserves the right to claim for shipping fees along with service charges for any product that 
is  returned  incomplete  or  not  under  warranty.    Return  Authorization  (  RMA  )  is  required  for  all  warranty  return 
products. 
 
ONE YEAR LIMITED WARRANTY 

The warranty described below is extended only to the original buyer and is not transferable.  
Diamond  warrants  to  the  original  purchaser  of  the  hardware  product,  that  the  product  is  free  from  defects  in 
materials or workmanship under normal use and service for a period of one (1) year from the date of purchase. 
All cables and accessories provided with a Diamond product are warranted to be free from defects in materials or 
workmanship under normal use and service for a period of for (90) ninety days from date of purchase.  
 
Diamond’s sole obligation under this warranty shall be, at Diamond’s option, to: (I) repair the defective product or 
parts; (II) deliver to customer an equivalent product or part to replace the defective product. When a product or 
part is replaced or exchanged, that item becomes the customer’s property and the replaced or exchanged item 
becomes  Diamond’s  property.  When  a  refund  or  replacement  product  is  given,  the  defective  product  becomes 
Diamond’s property. Replacement parts or products may be new or include serviceable used parts with at least 
the same functional equivalence to the original product. If, at the time of repair, a product is "out of warranty" or 
within  the  last  ninety  (90)  days  of  the  warranty  period,  Diamond  warrants  any  repair  for  ninety  (90)  days.  All 
software provided is subject to the terms of the associated software end-user license agreement.  
 
WARRANTY EXCLUSIONS AND LIMITATIONS  
TO  BE  ELIGIBLE  FOR  THIS  WARRANTY,  YOU  NEED  TO  PROVIDE  THE  ORIGINAL  SALES  RECEIPT 
SHOWING  THE  DATE  OF  PURCHASE  OF  THE  PRODUCT.  DIAMOND  MAY  REQUEST  THE  ORIGINAL 
SALES RECEIPT OR A COPY AS PROOF OF THE DATE OF PURCHASE.  
 
Diamond  does  not  warrant  third  party  products  which  Diamond  distributes  "AS  IS"  unless  otherwise  specified. 
Third party products may be warranted by the third party.  
 
Diamond makes no warranty or representation that: (I) the operation of the product will be uninterrupted or error 
free;  (II)  defects  in  the  product  will  be  corrected;  or  (III)  that  the  product  will  meet  Customer’s  requirements  or 
work in combination with any hardware or software provided by third parties.  
 
TO  THE  FULLEST  EXTENT  ALLOWED  BY  LAW,  THE  WARRANTIES,  REMEDIES  AND  LIMITATIONS 
CONTAINED  HEREIN  ARE  EXCLUSIVE  AND  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  TERMS  OR 
CONDITIONS,  EXPRESS  OR  IMPLIED,  EITHER  IN  FACT  OR  BY  OPERATION  OF  LAW,  STATUTORY  OR 
OTHERWISE,  INCLUDING  WITHOUT  LIMITATION,  WARRANTIES,  TERMS  OR  CONDITIONS  OF 
MERCHANTABILITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  QUALITY,  CORRESPONDENCE  WITH 
DESCRIPTION AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.  
 
DIAMOND WILL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE 
THAT  THE  ALLEGED  DEFECT  OR  MALFUNCTION  IN  THE  PRODUCT  OR  SOFTWARE  DOES  NOT  EXIST 
OR  WAS  CAUSED  BY  CUSTOMER’S  OR  ANY  THIRD  PARTY’S  MISUSE,  NEGLECT,  IMPROPER 
INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT 
OR  SOFTWARE,  OR  ANY  OTHER  CAUSE  BEYOND  THE  RANGE  OF  THE  INTENDED  USE,  OR  BY 
ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD. THIS WARRANTY WILL NOT APPLY 

Summary of Contents for WR300N









































Reviews: