User Manual
Page 13
of 40
Setup Diagram
Configure the WR300N as a Wireless AP
Use the WR300N as a Wireless Access Point to turn a regular modem-router
into a wireless capable networking device to connect wireless-enabled
devices such as laptops and smart phones.
To setup the device as a wireless AP
:
1.
Connect a PC/laptop to the Wireless Repeater. Plug an Ethernet cable
to the Ethernet port at the base portion of the device.
2.
Once a connection to the device is established, your PC/laptop will
receive an IP address and you can start the configuration using the
web graphical user interface.
3.
To access the web GUI, Launch your web browser and input
10.0.10.254 on the address bar.
4.
Input username as admin and password as admin. Click the OK button.
5.
Click on the Manual Setup button and enter the SSID, security type,
encryption type and WEP/passphrase for your Wireless Access Point,
then click the Apply button.
