6
2.
Move jumpers J1, J2, J3 to the closed position:
Your card is now set to the AGP 4X configuration.
Before You Install Your Card…
Before you install your Viper card, it is recommended that you set your display
driver to Standard VGA before you shut down your computer and remove your
legacy (AGP, PCI, or ISA) VGA card.
Setting the Standard VGA Under Windows 95
To set your display to Standard VGA under Windows 95:
1.
From the
Start
menu, go to
Start > Settings> Control Panel,
then double-click
on
Display
. The
Display Properties
sheet appears.
2.
Click on the
Settings
tab, then press the
Advanced Properties
button.
3.
Click on the
Adapter
tab, the press the
Chang
e button. The
Select Device
window
appears.
4.
Click on the
Show All Devices
bullet. Under
Manufacturers
select
(Standard
Display Types)
. Under
Model
s, select
Standard Display Adapter (VGA)
.
5.
Click on
Apply
, then click on
OK
in all windows to close and accept the changes.
6.
Shut down your computer. You are now ready to remove your old graphics card
and install your new Viper V700 Series board.
Setting the Standard VGA Under Windows 98
To set your display to Standard VGA under Windows 98:
1.
Select
Start > Settings >
Control Panel > Display.
The
Display Properties
dialog
appears.
2.
Choose the
Settings
tab and click on the
Advanced
button
.
3.
Click on the
Adapter
tab and click on the
Change
button. The
Update Device
Wizard
appears.
4.
Click
Next
and select
Display a list…
Jumper J1-3, open position,
Jumper J1-3, closed position,
