Installing MX300
13
Windows NT 4.0
Software and driver installation for Monster Sound MX300 is a
two-step process under Windows NT 4.0. The following sections
instruct you how to install the MX300 drivers and software.
Notes—(1)
Be sure you have already installed the Monster Sound
MX300 hardware. If you have not, complete the hardware
installation instructions that begin on page 6.
(2) Because
Windows NT 4.0 does not support Plug-n-Play, the hardware
drivers must be installed manually. Please refer to the following
instructions.
Before Installing the MX300 Drivers…
Insert the Monster Sound installation CD into your CD-ROM
drive. If your system has the CD-ROM set to “auto-play” or “auto
start,” the Monster Sound installation program will begin
automatically. Select
Installation
from the available options and
the
Setup
program will begin.
To complete the Monster Sound MX300 software installation…
1. Click
Next
when you see the installation
Welcome
screen.
2. Select a
Destination Directory
and click
Next
. We
recommend you use the installation default directories.
3. A dialog box appears and prompts you to select which
components you want to install. For Windows NT,
Audio
Utilities
is the only available option. Click
Next
.
If you do not want the MX300 Audio Utilities loaded, click
the check box to deselect it, then click
Next
.
4. Click
Next
again to install the selected application.
5. The Monster Sound II Setup window notifies you that the
installation is complete. Click
Finish.
6. The
System Settings Change
dialog appears and requests
you to reboot your computer. Click
Restart Now
.