REAR SWING FLAIL
OPERATOR’S MANUAL
CONTINUED ON NEXT PAGE
BELTS AND PULLEYS
Reversing Cutting Shaft Rotation:
NOTE:
“Forward rotation” is defined as
blade rotation the same as the tractor
tires when driving forward. “Reverse
rotation” is the opposite.
•
Remove access cover and belt
(2)
from the pulleys as described on the
previous page.
•
Remove the idler pulley
(1)
stop bolt
and main center bolt.
•
Remount the idler pulley
(1)
with its
stop bolt as illustrated (dashed
outline).
◦
A second location for the idler
position stop bolt will
be exposed.
◦
Re-attach the main center bolt to
lock it into position.
•
Replace the belt
(2)
as illustrated
(dashed outline) and access cover.
•
Disconnect the PTO drive shaft from
the gear box
(9)
.
•
Unbolt the top bracket
(10)
of the gear
box from the flail and gear box
(9)
.
•
Swap the oil breather and oil drain
plug illustrated in the
GEAR BOX
section of this manual on the
gear box
(9)
.
•
Remove the input shaft guard
(11)
and
reinstall onto the input shaft on the
opposite side of the gear box
(9)
.
•
Turn the gear box
(9)
over 180
o
and
reinstall it along with the
top bracket
(10)
.
•
Replace any lost oil as described in
the
GEAR BOX
section of
this manual.
(2)
(11)
(12)
(1)
(9)
(10)
(11)
21
