GETTING STARTED
•
The pressure
(1)
, return
(2)
, and case
drain
(3)
hoses from your flail mower
are identified in the illustration
at left.
•
Make sure the hose length outside
of the bracket
(4)
is long enough for
the head to make a full range of
motion, but not so long that the
hose can pinch.
•
Start machine at low idle and verify
that the cutting shaft is spinning in
“Reverse” rotation.
◦
NOTE:
“Forward” rotation is defined
as blade rotation the same as
the skid-steer / compact track
loader tires when driving forward.
“Reverse” rotation is
the opposite.
◦
If the cutting shaft is spinning in
“Forward” rotation, either inverse
the flow from your machine, or
switch the QD couplers on the
pressure
(1)
and return
(2)
hoses.
(4)
(1)
(3)
(2)
9
