Across the top of the page see
Metrics
. Beside each metric you’ll see a switch.
Green
means on.
White
means off. You will want the switch to show green next to each metric you want to be able to view on your
Pitch View.
To the far right of each metric you’ll see 3 stacked lines. Press and hold on these lines and you can
rearrange where that metric sits on the list. This will change the order that the metrics appear in on your
Pitch View.
Once you are done editing your metrics select
Done
in the upper right hand corner. You’ll be taken back to
your Pitch View
Options Menu
In the upper right hand corner you’ll see three (3) icons: a dot with curved lines on either side, two arrows
and three (3) stacked dots. The dot with the curved lines indicates if your Smart Ball is connected or not. It
will show
green
when a Smart Ball is connect and
grey
when there is no Smart Ball is connected. Select the
three (3) stacked dots. This is your options menu. By selecting this, it will open up with three (3) different
options. You’ll see a star, 3 dots connect by lines and a trash can. To favorite a pitch, click on the star. To
share the pitch, click on the icon that is 3 dots connect by lines. It will pull up how you want to share this
pitch.
This will share a screenshot of the current screen you are on.
To delete the pitch, click on the
trashcan. Once done, select anywhere on the screen to close this menu.
The arrow icon represents your pitch sets.The PitchTracker ball will record throws from the Pitcher and the
Catcher and store both of them. The ones that are displayed on the screen are the throws of the individual
who pitched first. You can always switch pitch sets by selecting the Arrow icon, selecting the
other set
and
then selecting
Save
. If you are using a Pitcher and Catcher there is a best set up that you can use!
Diamond Kinetics
PitchTracker Baseball - PitchTracker Ba
Page 25 of 76
