8
Put the Back cover with tweeter wires in a safe place.
Now remove the Philip Head screws holdng the Tweeter
Diaphragm assembly
Tweeter Diaphragm
Assembly
Tweeter Diaphragm
Assembly
Gently lift the Tweeter Diaphragm Assembly
off the NEO magent structure. Remove
the Phase plug.
Phase Plug
The Back cover needs to be removed. These sre 5 mm HEX
machine screws. Remove them and put them in a ZipLock bag
so you dont loose them. BE CAREFUL as there are small gauge
tweeter wires connected to the Diaphragm assembly (as shown)
THIS IS JUST IN CASE YOU BLOW YOUR TWEETER UP!
FIRST THINGS FIRST:
Once the Back cover is unscrewed.
Un-Solder the tweeter wires. It is
best that you shoot a photo to make
sure you wire it back correctly.
Make a note about which wire is
positive (+) and which wire is negative (-)
TWEETER DIAPHRAGM REPLACEMENT - DISASSEMBLY
MP84
MP84
60/40 Solder
Soldering
Iron
Allen Wrench
