H65A/S Speaker Manual 2013.indd Spread 4 of 4 - Pages(4, 5)
REAR ACOUSTIC FILL
Tweeter
Mid-bass
Driver
Rear-fill
Driver
Parameter (unit)
H65A/S
Sensitivity (dB)
88.3
Re (Ω)
3.6
Qts
0.68
Fs (Hz)
65
Vas (L)
11.2
Xmax (mm)
2.4
Pwr (W) NOM/MAX
75 / 150
THIELE/SMALL PARAMETERS
PHYSICAL DIMENSIONS
Am
p
lifie
r
Input to crossover
(from the
amplifiers output)
H65A/S
Each HEX component crossover has a third set of outputs marked “RAF”. This stands for Rear Acoustic Fill. This output
can be used to power and additional speaker off the same channel without effecting the impedance load on the source unit.
The level of this output is pre-determined at -10dB of attenuation, for a REAL “rear fill” This creates a much more real
stereo image and a bigger sound stage
©2014 Diamond Audio. All rights reserved.
(a division of CV & DA Holdings, lnc.)
©2014 Diamond Audio. All rights reserved.
(a division of CV & DA Holdings, lnc.)
6
3
6.54"
(166.0mm)
5.87"
(149.0mm)
Ø 6.14"
(156.0mm)
Ø 5.73"
(Ø 145.5mm)
2.9"
(73.50mm)
Ø 6.54"
(Ø 166.0mm)
Ø 3.74"
(Ø 95.0mm)
Ø 2.25"
(Ø 57.2mm)
Ø 1.96"
(Ø 49.8mm)
0.75"
(19.0mm)
